Page 1 of 1

Chosen for new launcher - failed verification step - need assistance resolving

Posted: Wed Jun 27, 2018 10:29 pm
by Jigsarnak
Support team -

I have been chosen for the new launcher. I have received an error, that relaunching the launcher does not seem to resolve.

After running the RoR launcher as an admin in properties and restarting and allowing it to download the MANIFEST and error (several times I have followed troubleshooting steps to close and relaunch it, including rebooting), I got to "Verifying" where it fails on "(WORLD 8/8)...6538/48755" with the following error:

Error: System.IO.InvalidDataException: Found invalid data while decoding.
at System.IO.Compression.Inflater.DecodeDynamicBlockHeader()
at System.IO.Compression.Inflater.Decode()
at System.IO.Compression.Inflater.Inflate(Byte[] bytes, Int32 offset, Int32 length)
at System.IO.Compression.DeflateStream.Read(Byte[] array, Int32 offset, Int32 count)
at WarZoneLib.MYP.MFTEntry.J8F8oMXcxxo8cQOTb5G(Object , Object , Int32 , Int32 )
at WarZoneLib.MYP.MFTEntry.ReadData(Stream _stream)
at WarZoneLib.MYP.DnrpUa5F73Bk8n1EA5(Object , Object )
at WarZoneLib.MYP.ReadFile(Int64 hash)
at RoRLauncher.Client.BuiNsF8P6RAWgYkT560(Object , Int64 hash)
at RoRLauncher.Client.VerifyManifest(CSV csv)
at RoRLauncher.Client.xVvlO9jPgeV6iXdoqwr(Object )
at RoRLauncher.Client.Handle(PacketIn packet)
at RoRLauncher.Client.vGnnXfjyB4nk0lwBxOJ(Object )
at RoRLauncher.Client.OnReceive(PacketIn packet)
at RoRLauncher.Client.TqGRu3jiPH43as5fSlh(Object )
at RoRLauncher.Client.aTeZhtuHK8(Object )

May I have some suggestions that could assist? I am having trouble navigating the forums to perhaps a better place to look or thread to find an answer, and any direction or assistance is appreciated!

Also thank you for your work on the client! I am excited!

-Jig

Re: Chosen for new launcher - failed verification step - need assistance resolving

Posted: Thu Jun 28, 2018 7:52 am
by Glorian
Jigsarnak wrote: Wed Jun 27, 2018 10:29 pm Support team -

I have been chosen for the new launcher. I have received an error, that relaunching the launcher does not seem to resolve.

After running the RoR launcher as an admin in properties and restarting and allowing it to download the MANIFEST and error (several times I have followed troubleshooting steps to close and relaunch it, including rebooting), I got to "Verifying" where it fails on "(WORLD 8/8)...6538/48755" with the following error:

Error: System.IO.InvalidDataException: Found invalid data while decoding.
at System.IO.Compression.Inflater.DecodeDynamicBlockHeader()
at System.IO.Compression.Inflater.Decode()
at System.IO.Compression.Inflater.Inflate(Byte[] bytes, Int32 offset, Int32 length)
at System.IO.Compression.DeflateStream.Read(Byte[] array, Int32 offset, Int32 count)
at WarZoneLib.MYP.MFTEntry.J8F8oMXcxxo8cQOTb5G(Object , Object , Int32 , Int32 )
at WarZoneLib.MYP.MFTEntry.ReadData(Stream _stream)
at WarZoneLib.MYP.DnrpUa5F73Bk8n1EA5(Object , Object )
at WarZoneLib.MYP.ReadFile(Int64 hash)
at RoRLauncher.Client.BuiNsF8P6RAWgYkT560(Object , Int64 hash)
at RoRLauncher.Client.VerifyManifest(CSV csv)
at RoRLauncher.Client.xVvlO9jPgeV6iXdoqwr(Object )
at RoRLauncher.Client.Handle(PacketIn packet)
at RoRLauncher.Client.vGnnXfjyB4nk0lwBxOJ(Object )
at RoRLauncher.Client.OnReceive(PacketIn packet)
at RoRLauncher.Client.TqGRu3jiPH43as5fSlh(Object )
at RoRLauncher.Client.aTeZhtuHK8(Object )

May I have some suggestions that could assist? I am having trouble navigating the forums to perhaps a better place to look or thread to find an answer, and any direction or assistance is appreciated!

Also thank you for your work on the client! I am excited!

-Jig
See here for a walkthrough and troubleshooting guide on the launcher.
viewtopic.php?f=4&t=27103&p=306983#p306983

Re: Chosen for new launcher - failed verification step - need assistance resolving

Posted: Fri Jun 29, 2018 1:27 am
by Jigsarnak
Glorian wrote: Thu Jun 28, 2018 7:52 am
Jigsarnak wrote: Wed Jun 27, 2018 10:29 pm Support team -

I have been chosen for the new launcher. I have received an error, that relaunching the launcher does not seem to resolve.

After running the RoR launcher as an admin in properties and restarting and allowing it to download the MANIFEST and error (several times I have followed troubleshooting steps to close and relaunch it, including rebooting), I got to "Verifying" where it fails on "(WORLD 8/8)...6538/48755" with the following error:

Error: System.IO.InvalidDataException: Found invalid data while decoding.
at System.IO.Compression.Inflater.DecodeDynamicBlockHeader()
at System.IO.Compression.Inflater.Decode()
at System.IO.Compression.Inflater.Inflate(Byte[] bytes, Int32 offset, Int32 length)
at System.IO.Compression.DeflateStream.Read(Byte[] array, Int32 offset, Int32 count)
at WarZoneLib.MYP.MFTEntry.J8F8oMXcxxo8cQOTb5G(Object , Object , Int32 , Int32 )
at WarZoneLib.MYP.MFTEntry.ReadData(Stream _stream)
at WarZoneLib.MYP.DnrpUa5F73Bk8n1EA5(Object , Object )
at WarZoneLib.MYP.ReadFile(Int64 hash)
at RoRLauncher.Client.BuiNsF8P6RAWgYkT560(Object , Int64 hash)
at RoRLauncher.Client.VerifyManifest(CSV csv)
at RoRLauncher.Client.xVvlO9jPgeV6iXdoqwr(Object )
at RoRLauncher.Client.Handle(PacketIn packet)
at RoRLauncher.Client.vGnnXfjyB4nk0lwBxOJ(Object )
at RoRLauncher.Client.OnReceive(PacketIn packet)
at RoRLauncher.Client.TqGRu3jiPH43as5fSlh(Object )
at RoRLauncher.Client.aTeZhtuHK8(Object )

May I have some suggestions that could assist? I am having trouble navigating the forums to perhaps a better place to look or thread to find an answer, and any direction or assistance is appreciated!

Also thank you for your work on the client! I am excited!

-Jig
See here for a walkthrough and troubleshooting guide on the launcher.
viewtopic.php?f=4&t=27103&p=306983#p306983
Thank you for the suggestion!

I have walked through all steps with the same error resulting - It seems I had luck all the way up to the verify section that fails, still after reviewing and attempting steps from the troubleshooter.

Further suggestions welcome!

-

Reference:

Step 01 : Open game folder and check "mythloginserviceconfig.xml" properties : It MUST NOT be read only. Uncheck "read only" property if checked. Verify ten times if needed. When done go step 02.

-Checked, is not set read only.

Step 02 : Lets start "RoRUpdater.exe" (admin mode is always a better choice). It should download and replace "RoRLauncher.exe". When done, go to step 03.

-Set to run as admin, re-ran it to be sure it worked and disabled AV protection when completed.

Step 03 : Start "RoRLauncher.exe" (admin mode is always a better choice). It should verity/download some files (some minutes). Don't enter any info (log or pass) at this precise moment. Wait it finishes its little wawa. When done, go to Step 04.

-Set to run as admin, waited for it to verify. Failed at same error above both when saving the Launcher as 32 and 64 bit (no effect) with AV disabled during the process.

Step 04 : give your login and password, then press "ENTER" (to validate your password mostly). "CONNECT" button should still be grey. Anyway. Click on "CONNECT"

-Unable to reach this step.

Re: Chosen for new launcher - failed verification step - need assistance resolving

Posted: Fri Jun 29, 2018 5:17 am
by Yaliskah
Mmm question. Is your game folder read only?

Re: Chosen for new launcher - failed verification step - need assistance resolving

Posted: Fri Jun 29, 2018 8:36 am
by MaxHayman
This looks like a file which failed decompression. I will be releasing a patch for this later. I will post it here when it is ready.